
The “Over & Under” Hem
This technique is useful, not
only for blanket edges, but a perfect solution for sideways knit
skirt hems.
Preparation
Before you begin knitting, measure
off a length of MC yarn, triple the finished length of the project.
(You need 2 extra yarns for a blanket – one for each edge).
The Procedure
CO and K 2 Rs of your project.
Pull to UWP the last 7 ndls on the hem edge (or both ends for a
blanket). With a strand of the extra yarn, begin by hanging it over
the UWP ndl closest to the center of the work. Go under the next
ndl, and over the next ndl. You will be working toward the outside
edge. Keep working over and under until you reach the last ndl.
This ndl will be an “over”. (Repeat this for the other
edge on the blanket.) K 2 Rs. Bring up the extra yarn from below
and repeat the “over/under” technique, working from
the outside toward the center. K 2 Rs.
Repeat this 4-R process. After
blocking, weave in the yarn tails. |